//

***MENUGROUP=pnlmkr

***POP1
**BUSELLATO
               [&Busellato]
               [Drawing to AutoLink]^C^CSEND 
               [Window to AutoLink]^C^CSENDWIN 
               [--]
               [Make Panel Border]^C^CBORDER 
               [Vertical Drilling]^C^CVBORE 
               [Horizontal Drilling]^C^CHBORE 
               [Groove Saw]^C^CGROOVE 
               [Routing]^C^CROUTE 
               [Set Route Startpoint]^C^CSPDA 
               [Change Current Layer]^C^CLAYSET 
               [Match Entities Properties to Another Entity]^C^CMATCH 

***TOOLBARS
**BUSELLATO
ID_Busellato_0 [_Toolbar("Busellato", _Floating, _Show, 490, 112, 1)]
ID_Select_All_0 [_Button("Drawing out", "ICON9912.bmp", "ICON_24_SELALL")]^C^CSEND 
ID_Select_Window_0 [_Button("Window Out", "ICON5667.bmp", "ICON_24_SELWIN")]^C^CSENDWIN 
               [--]
ID__0          [_Button("Border", "ICON9895.bmp", "ICON_24_BLANK")]^C^CBORDER 
ID__1          [_Button("Vertical Dril", "ICON5447.bmp", "ICON_24_BLANK")]^C^Cvbore 
ID__2          [_Button("Horizontal Dril", "ICON1726.bmp", "ICON_24_BLANK")]^C^Chbore 
ID__3          [_Button("Groove Saw", "ICON4771.bmp", "ICON_24_BLANK")]^C^CGROOVE 
ID__4          [_Button("Routing", "ICON1538.bmp", "ICON_24_BLANK")]^C^CROUTE 
ID__5          [_Button("Set Mill", "ICON1869.bmp", "ICON_24_BLANK")]^C^CSPDA 
               [--]
ID__6          [_Button("Change Layer", "ICON6299.bmp", "ICON_24_BLANK")]^C^CLAYSET 
ID_Match_Properties_0 [_Button("Match Entities", "ICON7035.bmp", "ICON_24_MATCH")]^C^CMA